Conforms to JIS C60068-2-27. 147 m/s2 three times each in X, Y, and Z directions
CP1L-EM" and "CP1L-EL" have complete with a Ethernet port.
Pulse output for two axes. Advanced power for high-precision positioning control.
High-speed Counters. Single-phase for four axes.
Six interrupt inputs are built in. Faster processing of instructions speeds up the entire system.
Serial Communications. Two ports. Select Option Boards for either RS-232C or RS-485 communications.
"CP1L-M" and "CP1L-L" have a peripheral USB port.The Structured Text (ST) Language. Makes math operations even easier.
Can be used for the CP1W series Unit. The extendibility of it is preeminently good LCD displays and settings. Enabled using Option Board.
The standards are abbreviated as follows U UL, U1 UL (Class I Division 2 Products for Hazardous Locations), C CSA, UC cULus, UC1 cULus (Class I Division 2 Products for Hazardous Locations), CU cUL, N NK, L Lloyd, KC KC Registration, and CE EU Directives.
Contact your OMRON representative for further details and applicable conditions for these standards.
Specification: Type AC power supply models:
DC power supply models ModelCP1L-ACP1L-D Power supply 100 to 240 VAC 50/60 Hz24 VDC
Operating voltage range 85 to 264 VAC 20.4 to 26.4 VDC Power consumption 50 VA max. (CP1L-M60/-M40/-M30-A) 30 VA max. (CP1L-L20/-L14/-L10-A)20 W max. (CP1L-EM40/-EM30/-M60/-M40/-M30-D)13 W max. (CP1L-EL20/-L20/-L14/-L10-D) Inrush current *100 to 120 VAC inputs 20 A max. (for cold start at room temperature) 8 ms max.200 to 240 VAC inputs 40 A max. (for cold start at roomtemperature),8 ms max.30 A max. (for cold start at room temperature) 20 ms max. External power supply300 mA at 24 VDC (CP1L-M60/-M40/-M30-A) 200 mA at 24 VDC (CP1L-L20/-L14/L10-A) None Insulation resistance20 M min. (at 500 VDC) between the external AC terminals and GR terminalsNo insulation between primary and secondary for DC power supply.
Dielectric strength 2,300 VAC at 50/60 Hz for 1 min between the external AC and GR terminals, leakage current 5 mA max.No insulation between primary and secondary for DC power supply
Conforms to JIS C60068-2-6. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration 9.8 m/s2 in X, Y, and Z directions for 80 minutes each. Sweep time 8 minutes x 10 sweeps= total time of 80 minutes)
CP1L-EL/EM 5 to 8.4 Hz, 3.5 mm amplitude, 8.4 to 150 Hz, acceleration 9.8 m/s2 in X, Y, and Z directions for 100 minutes each (time coefficient of 10 minutes x coefficient factor of 10 = total time of 100 minutes)